, , , , ,

T20-C5 Bevel Soldering Tip 5mm /45° x 10mm

SKU: HT20-C5

Hakko
Availability:

In stock


T20 Soldering Tip Shape-5C For the FX-8301. FX-8302

41.98 Ex VAT

In stock

Please note: Prices displayed are Exc. VAT and we are only able to accept orders in the Republic of Ireland from customers with a valid EU VAT Number. For customers without this number, please contact our Head Office on the Freephone Number shown above. Thank you

How to use Shape BC/C and examples

This type has a shape like a cone or column cut at a slant, which allows users to select the cut surface size depending on the workpiece.
It is used for drag soldering and pre-tinning of lead wires.

Type F, tinned surface only, is available for Shape BC/C. Try Type F when troubling with excessive solder amount or bridge to neighbouring parts.
* Not suitable when heavy heat capacity is required.

Difference between BC/C type and BCF/CF type

Shape BC Shape C
Difference Shape This type has a shape like a cone cut at a slant.

H K Wentworth - HAKKO UK and Ireland distributor

This type has a like a column cut at a slant.

H K Wentworth - HAKKO UK and Ireland distributor

Heat capacity
of tip
In Shape BC with its conical shape, the nearer to the base, the thicker the diameter. Therefore, although these types have the same diameter Φ1, Shape BC has more heat capacity.

Difference between Shape BC and C
Graph and Animation help you to understand it easily.

Commonality How to select
tip size
Please select the cut surface size depending on the workpiece.
Others In case of a chip condenser, we recommend soldering it with Shape BC or C to form ideal solder fillet, which can be hardly formed with Shape B or D.

Soldering tiny chip parts such as 0603

H K Wentworth - HAKKO UK and Ireland distributor Put the cut surface to the land.
* Soldering tip in the picture is T13-BCF1 with an N2 system iron for pre-heating effect.

Some IC is specified by manufacturer not to be touched electrode by tip end.

The other tip shapes are recommended.
Soldering tiny chip parts such as 0603

Soldering chip parts

H K Wentworth - HAKKO UK and Ireland distributor Put the cut surface to the land and drag the tip slowly while feeding solder.

Some IC is specified by manufacturer not to be touched electrode by tip end.

Drag soldering

H K Wentworth - HAKKO UK and Ireland distributor Put the cut surface to the leads and drag it slowly.

Apply flux to leads and land pads before soldering. It prevents the troubles such as solder bridge.

See the movie for further details, (Shape BC)

Pre-tinning lead wire

H K Wentworth - HAKKO UK and Ireland distributor Put the cut surface to the lead and drag the tip slowly while feeding solder.

Point soldering

H K Wentworth - HAKKO UK and Ireland distributor
1. Put the tip end to the land and the through-hole at one time to heat them.
2. Feed solder to form smooth fillet on the land pad.

Melting and removing coil coatings

H K Wentworth - HAKKO UK and Ireland distributor
1. Put the cut surface to the coil and terminal at one time to heat them.
2. Feed solder.